Question 1

How long does a new concrete driveway take to install?

Accepted Answer

Most residential concrete driveways in the Tillsonburg area take 2–3 days from start to finish, weather permitting. Day one covers excavation and base prep; day two is the pour and finishing; day three (if needed) handles any detail work. You can walk on the surface within 24–48 hours and drive on it after 7 days for full cure. We'll give you a firm timeline before we start.

Question 2

Do I need a permit for a new patio or driveway in Tillsonburg?

Accepted Answer

Whether you need a permit depends on the scope and proximity to property lines, easements, or drainage infrastructure. Many residential driveways and patios in Oxford County don't require a permit, but some do — particularly larger pads or those close to lot lines. We're familiar with local Oxford County requirements and will advise you during your free on-site quote so there are no surprises.

Question 3

Is stamped concrete slippery when wet?

Accepted Answer

Stamped concrete can be slippery when wet if sealed with a standard high-gloss sealer. That's why we add an anti-slip grip additive to every batch of sealer we apply on driveways, patios, and walkways. This creates a slightly textured surface that significantly improves wet traction while maintaining the decorative appearance. We won't seal a surface without it.

Question 4

How long does concrete need to cure before I can drive on it?

Accepted Answer

Light foot traffic is safe after 24–48 hours. You should wait a full 7 days before driving a standard passenger vehicle on the new concrete, and at least 28 days before parking heavy trucks or equipment on it. Concrete reaches its design strength gradually — rushing this process is one of the most common causes of surface damage in new pours.

Question 5

What makes concrete crack in Ontario winters?

Accepted Answer

The main cause is the freeze-thaw cycle: water seeps into tiny surface pores, freezes and expands, then thaws — repeatedly widening cracks with every cycle. We prevent this in three ways: air-entrained concrete mix (tiny air voids absorb freeze-thaw pressure), engineered control joints cut at the correct depth and spacing so any cracking happens invisibly at the joint, and premium penetrating sealers applied after the pour to block moisture intrusion at the surface.

Question 6

Do you offer any warranty on your concrete work?

Accepted Answer

Yes — we provide a written workmanship warranty on every project we complete. The warranty covers defects in our workmanship and materials. We'll walk you through exactly what's covered before you sign anything. If you ever have a concern after the job is done, call us directly — we stand behind what we pour.

Concrete FAQ — Honest Answers

Still Have Questions?

Free On-Site Estimate in 24 Hours